Translate:

+1 (705) 687-4343 | Contact Us

Products

LCAS

Products DC-3/BT-67

DOUGLAS DC-3 BT-67 SURVEY NOSE BOOM

dc-3-bt-67

LCAS’ nose-mounted transition and boom assemblies carry the magnetometer sensor and requisite electronics. This modification consists of an externally mounted aluminum transition pylon assembly

AGNAV NAVIGATION SYSTEMS

dc-3-bt-67

AGNAV LIGHT BAR - LCAS’ fully certified (Supplemental Type Certificate) AGNAV light bar installation is designed to give aircraft the ability to carry AGNAV light bars in the cockpit area to pr

RMS DATA ACQUISITION & REAL-TIME COMPENSATOR

dc-3-bt-67

WE OFFER RMS INSTRUMENTS, SPECIALIZES IN RESEARCH, DEVELOPMENT AND PRODUCTION OF RUGGEDIZED DATA RECORDING EQUIPMENT, TEST & MEASUREMENT INSTRUMENTS, AND GEOPHYSICAL EXPLORATION SYSTEMS. P

DOUGLAS DC-3 BT-67 GT-1A & GT-2A GRAVITY METER MOUNT

dc-3-bt-67

LCAS’ fully certified (Supplemental Type Certificate) GT-1A & GT-2A Gravity Meter System is designed is designed to give aircraft the ability to carry Canadian Micro Gravity Meter GT-1A o

DOUGLAS DC-3 BT-67 SURVEY TAIL BOOM

dc-3-bt-67

LCAS’ fully certified (Supplemental Type Certificate) tail-mounted transition and boom assemblies carry the magnetometer sensor and requisite electronics. The aft part of the boom system contai

DOUGLAS DC-3 BT-67 ROLLER FLOOR INSTALLATION

dc-3-bt-67

The LCAS fully certified (Supplemental Type Certificate) roller floor system installs into the available sea tracks and does not affect cargo tie-down provisions. This modification involves th

DOUGLAS DC-3 BT-67 EM SURVEY BIRD, NEST AND DOCKING SYSTEM

dc-3-bt-67

The LCAS EM bird and winch system is designed provide the aircraft operators the ability to deploy and retrieve an EM tow bird with a hydraulic winch system. The modification involves the inst

DOUGLAS DC-3 BT-67 GROUND CREW SAFETY FITTINGS

dc-3-bt-67

This modification involves the installation of a series of Anchra anchor plates on the fuselage top side on DC-3 BT-67 aircraft. The anchor plates will run along the length of the fuselage and wi

DOUGLAS DC-3 BT-67 SONOBOUY CHUTE

dc-3-bt-67

This modification involves the addition of a Sonobouy tube/chute in the fuselage of the Basler BT-67 aircraft. The chute is a tubular assembly that is mounted to the aft cabin floor and fuselage

DOUGLAS DC-3 BT-67 UNDERSIDE ROLLER DOOR

dc-3-bt-67

  The LCAS fully certified (Supplemental Type Certificate) roller door system is designed provide a means of opening and closing of instrument openings installed in the lower fuselage.

DC-3 BT-67 SURVEY BELLY POD

dc-3-bt-67

LCAS’ fully certified (Supplemental Type Certificate) survey belly pod system is designed to allow operators to use equipment that would normally require major structural airframe alterations s

DOUGLAS DC-3 BT-67 WINGTIP BOOMS

dc-3-bt-67

LCAS’ fully certified (Supplemental Type Certificate) wing-mounted composite interface and boom assemblies carry the magnetometer sensor and requisite electronics. The forward part of the boom

50 INCH EQUIPMENT RACK

dc-3-bt-67

The LCAS fully certified (Supplemental Type Certificate) 400 Series Equipment Racks are designed to give operators of aircraft requiring an approved method of restraining various equipment / inst

40 INCH EQUIPMENT RACK

dc-3-bt-67

The LCAS fully certified (Supplemental Type Certificate) 400 Series Equipment Racks are designed to give operators of aircraft requiring an approved method of restraining various equipment / inst

36 INCH EQUIPMENT RACK

dc-3-bt-67

The LCAS fully certified (Supplemental Type Certificate) 400 Series Equipment Racks are designed to give operators of aircraft requiring an approved method of restraining various equipment / inst

30 INCH EQUIPMENT RACK

dc-3-bt-67

The LCAS fully certified (Supplemental Type Certificate) 400 Series Equipment Racks are designed to give operators of aircraft requiring an approved method of restraining various equipment / inst

24 INCH REDUCED DIMENSION EQUIPMENT RACK

dc-3-bt-67

The LCAS fully certified (Supplemental Type Certificate) 400 Series Equipment Racks are designed to give operators of aircraft requiring an approved method of restraining various equipment / inst

24 INCH EQUIPMENT RACK

dc-3-bt-67

The LCAS fully certified (Supplemental Type Certificate) 400 Series Equipment Racks are designed to give operators of aircraft requiring an approved method of restraining various equipment / inst

12 INCH EQUIPMENT RACK

dc-3-bt-67

The LCAS fully certified (Supplemental Type Certificate) 400 Series Equipment Racks are designed to give operators of aircraft requiring an approved method of restraining various equipment / inst

Translate »